Fascia Hanger With Tab

$7.89$8.67

This hanger is designed for a vertical (plumb) fascia board installation.

This hanger is designed for a vertical (plumb) fascia board installation. With steel being 1" thick and 1/5" wide they are super strong. The hanger follows the gutter beautifully. The hanger also allows for the fascia board to breathe and dry out, minimizing rotting problems that otherwise are common. The tabs on the hanger makes it perfectly suited for all construction, including remodeling and renovation. The hanger is tested to the highest standards and strength classification available. Fasten the hanger with 2 stainless or exterior screws, min 1 3/4" long, per hanger.
This hanger can also be used on fascia boards 90° to the roof pitch. You can bend the short tail of the hanger if you need to. Works up to 12/12 pitch. Just remember on longer runs that the gutter will move farther in towards the siding, when sloped correctly.
Calculate with one hanger per two feet of gutter.

Additional information

Color

White, Black, Anthracite Metallic, Silver Metallic, Dark Bronze