G Halfround Gutter
MIN / MOUT Miter Inside / Miter Outside 90°
MIN / MOUT 135 Miter Inside / Miter Outside 135°
GC Gutter Connector
ECU End Cap Universal
ECL/ECR End Cap
HFT Fascia Hanger w/ Tab
HFL Fascia Hanger Self Locking
OPM Overflow Protector
OFP Overflow Protector
DSBW Downspout Bracket Wide
DSB Downspout Bracket
E70 Elbow 70°
E85 Elbow 85°
RBE Reinforced Bead Elbow
DTE Drain Tile Extension
YC Y Connector
IDT Inline Diverter
OS4 Offset 4"
TPA Touch Up Paint
The half round gutter is superior in transporting water compared to any other style. Water always collects to the absolute bottom and helps cleaning out debris and leaves. The thick 23 gauge galvanized steel with its unique bead design makes it extremely strong yet light enough to have a quick install.
Miter Inside / Miter Outside 90°
Miters are made from the same thick steel as the gutters for a perfect fit. They are stamped out of 1 piece with absolutely no chance of leaking. Instead of discoloring and looking different they flow into the rest of the system in perfect harmony given the exact same colors and material, without any caulk, rivets or screws disturbing waterflow or appearance.
Miter Inside / Miter Outside 135°
The 135 degree miters (or 45 degree depending on your measuring point) are great for your bay windows. Welded together and perfectly color matched they are as the 90 degree angle completely caulk, rivet and screw free and fits perfectly with the gutters creating an unobstructed flow from one gutter to the other.
The gutter connector is an amazing invention. With its EPDM rubber (same type of rubber you have sealing your truck doors) it connects gutters together and gutter angles in a matter of seconds. Fold the tab over the bead whilst leaving an 1/8" gap between the gutters and lock it into place securing the tab, you are done. Do not put any caulk, rivet or screws to the product. This product allows for expansion and contraction of the system. By the way did you know that steel moves half as much and half as fast as aluminum, and with the EPDM rubber always staying flexible you have zero leaks.
End Cap Universal
The Lindab engineers really got it right with this product, who would believe you would not need to crimp, caulk, rivet or screw your end caps. Well believe it, this product allows just that. With its EPDM rubber gasket (same type of rubber you have sealing your truck doors) and the 4 flanges specifically developed to grip and seal this is as easy as it gets. Simply align it over the bead, slap it on with your hand or rubber mallet, fold off the ear against the fascia with ease and you are done. No caulking, crimping or putting any rivets or screws to hold it in place are needed to make this awesome product to work. The EPDM seals and grips on tight and you will have zero leaks, and zero call backs.
These end caps have the traditional look and feel and are very easy to work with. Made of the same strong material as the rest of the system and with its 1" overlap into the gutter they are a fast and easy install.
Fascia Hanger w/ Tab
These hangers are as strong as they come. With steel being 1" wide by 1/5" thick you can rest assured they will keep the system in place in the harshest of conditions. The exterior hanger allows for the fascia board to breathe and dry out, minimizing rotting problems that otherwise are common. The tabs on the hanger makes it perfectly suited for all construction including remodeling and renovation. The hanger is tested to the highest standards and strength classification available.
Fascia Hanger Self Locking
These hangers can be mounted snug and high to your drip edge. With steel being 1" thick and 1/5" wide they are super strong and follows the gutter beautifully. Quick install where you place the back edge of the gutter into the hanger and simply push the bead in and down into place. The exterior hanger allows for the fascia board to breathe and dry out, minimizing rotting problems that otherwise are common. Suited for all new construction and remodeling, this hanger is tested to the highest standards and strength classification available.
The overflow protector is very usable for those valleys where you have an increased water flow coming down from your second or higher story roofs. Stops the water from gushing over and redirects it into the gutter. Very easy to install with the tabs that fits perfectly over the bead of the inside miter.
The straight overflow protector can be placed anywhere in the gutter. Very easy to install with the tabs that fits perfectly over the bead of the gutter. Usable where you have concentrated drains from the gutter system on the higher rooflines flowing out on you lower roofs.
The exterior outlet is unbelievably easy to put on the gutter, simply stick the 90 degree tab into the bead of the gutter, roll it back and under the gutter, it will click into place and you finish with securing the tab down over the backside of the gutter. No caulking, and no rivets or screws to make this product work. Being constructed to allow for a 6-7" whole in the gutter, this outlet guarantees free flowing water that evacuates without any obstructions at all. Guaranteed not to leak.
The round downspout is superior in transporting water from the gutter and out, why just ask any plumber why we all use round piping, it is simply the most efficient way of transporting fluids. Constructed from the same strong 23 gauge galvanized steel as the gutters, the double interlocking seam is super strong and the preshrunk end overlaps 2" perfectly every time.
The bridge is made from the same thick 23 gauge galvanized steel material as the downspouts. Pre-engineered shrunk in both ends these 3' sections are made to be cut giving you 2 bridges to work with when you have the little bit longer overhangs.
Downspout Bracket Wide
A fantastic product that simply wraps around the downspout and have 2 locking positions. The first allows you to adjust the downspout and the second tightens the product and wraps it securely around the downspout, holding it firmly in place. 2 brackets per downspout is recommended. Should you damage your downspout, you can easily open it to change the damaged product by simply inserting a screw driver into the holes on the edge of the overlapping section and gently prying it open.
The traditional bracket made of thick galvanized steel has 2 screws holding the clamp. One side has an opening allowing you to simply open it up, fold it over and lock it into place tightening the screws.
These elbows are a thing of beauty and a testament to the true engineering behind this system. The 70-degree angle is perfect for most buildings. These elbows are conical and come with a male a female end that fits perfect every time, always overlapping 2". The double seam is turned outside in halfway through the arch, making the fit to elbows, outlets and downspouts extremely snug. Absolutely no need for caulking or putting any rivets or screws into the system. In most other systems caulking and putting screws in the flow of water results in debris being clogged increasing the risk for leaks.
This 85-degree elbow is conical and welded together in a perfect fit. Very usable for those long overhangs where you need to get back onto a wall or vertical area to continue down. Has the same 2" overlap as the rest of the system making it very easy to install. Absolutely no need for caulking or putting any rivets or screws into the system. In most other systems caulking and putting screws in the flow of water results in debris being clogged increasing the risk for leaks.
Reinforced Bead Elbow
The reinforced bead elbow to finish off the system at the bottom of the downspout has been engineered with the same care for details as the other elbows. The seam is turned outside in halfway down the arch and the bottom lip is gently curled back making the end smooth and gentle to the touch, keeping the smallest of persons and their curiosity in mind, no risk for cuts. The top is expanded to fit outside the downspout should you have cut it to use the pre-shrunk end. To fix the elbow put a small tap screw in the backside of the product. This is the only screw you ever put into the system.
Drain Tile Extension
This product is designed to sit on top of the chute, covering the gap between the downspout and the chute completing the system's sleek and savvy look. It fits outside of the downspout and can easily be moved up or down should you need to remove the chute for any reason.
The Chute is a self-cleaning leaf and debris product. Since the half round gutter system is so efficient in transporting everything out and down, especially with that 6-7" hole in the gutter allowing water and debris to flow extremely smooth into the outlet, this product separates and discards leaf and debris out while allowing water to flow down through the grid. This is about as easy as cleaning gutter gets, self-cleaning.
The Y connector is very usable when you want to tie in more rooflines to one downspout. Sometimes you are restricted by construction and sometimes it is just more aesthetically appealing. You have a great allowance on you incoming angle giving you much flexibility. The connector has both an expanded and shrunk end so connecting the downspouts are easy. Absolutely no need for caulking or putting any rivets or screws into the system. In most other systems caulking and putting screws in the flow of water results in debris being clogged increasing the risk for leaks.
The diverter is a product designed for having a water barrel collecting rainwater. The water you can then use on sunny days giving you that gardener feeling whilst conserving both resources and money. Simply fold out the tongue when you wish to collect water and fold it back up when the barrel is full. The diverter has both an expanded and shrunk end so connecting it into the downspout is easy.
The 4" offset is used to bridge over a lower protruding brick facade system or other constructions that requires you to move slightly from the center of your downspout. The 4" offset have an expanded top and shrunk bottom end to fit outside and inside the downspout and the same double seam that is turned outside in halfway through the arches. For reference the 70 degree elbows connected together gives you an 7" offset.
Touch Up Paint
The touch up paint is rich with primer coating characteristics thus giving maximum protection where it is applied. Shake the bottle carefully before applying the paint, once unscrewed attached to the lid is a small brush. The paint has been designed to dry quickly and the bottle is small enough to always have one in your pocket when you are installing.